Flywheel Puller Guide by Model

Grade 8 High-Strength Steel Hex Head Screw Bolt Flywheel Puller

Good for demanding applications such as suspension system, these screws are at least 25 % stronger than medium-strength steel screws. Length is measured under the head. Zinc yellow- chromate plated steel screws resist corrosion in wet environments.This...

Flywheel Puller Male 28 mm x 1.25 mm Right Hand 2 Piece

This listing is for a new Flywheel Puller Male 28 mm x 1.25 mm, Right Hand Threads. Compatible with Harley Davidson 50/65CC Aermacchi motor which was used from 65 thru 72 on two models, Leggero and the Sportster. Leggero used from 65 thru 72, Sportster...

Flywheel Puller [55mm x 1mm] Compatible for Ducati Single 250 NC

This listing is for a new Flywheel Puller 55mm x 1mm Right Hand Threads.Note: The following is for reference only. Please check the thread size of your motor before ordering.Compatible with Ducati 200/250/350 and most narrow-case bevel single models...

Flywheel Puller [38mm x 1.5mm] Compatible for Kawasaki Suzuki KLX400

This listing is for a new Flywheel Puller 38mm x 1.5mm Right Hand Threads.Note: The following is for reference only. Please check the thread size of your motor before ordering.  Compatible with Kawasaki models: most KXF400 Quads, KXL400 Dirt...

Flywheel Puller [35mm x 1.5mm] Compatible for Honda Yamaha 350 Warrior

This listing is for a new Flywheel Puller 35 mm x 1.5 mm Right Hand Threads. Note: The following is for reference only. Please check the thread size of your motor before ordering.    Fit for Honda Models: TRX250 / 350 / 450. Fit for...

ATV Flywheel Puller CH250 Elite 33mm x 1.5mm Compatible for Suzuki GSXR600 & GSXR750

This listing is for a new Flywheel Puller 33mm x 1.5mm Right Hand Thread. Threads are outside of the engine part (Inside female threads on tool). Note: The following is for reference only. Please check the thread size of your motor before ordering...

Flywheel Puller [33mm x 1.5mm] Compatible for Bultaco Ossa Husqvarna

This listing is for a new Flywheel Puller 33 mm x 1.5 mm Right Hand Threads.Note: the following is for reference only. Please check the thread size of your motor before ordering.Fit for Husqvarna Models: most ’60-’70 Models w/Ignition Point...

Flywheel Puller [30mm x 1.5mm] Compatible for Kawasaki Suzuki GS

This listing is for a new Flywheel Puller 30mm x 1.5mm Right Hand Thread.Note: The following is for reference only. Please check the thread size of your motor before ordering. Fit for Kawasaki models: some KLF Quad models, check size Fit for Suzuki...

Flywheel Puller [30mm x 1.5mm] Compatible for Euro Mini Bike Penton Sachs Zundap Ossa

This listing is for a new Flywheel Puller 30 mm x 1.5 mm Right Hand Threads.Note: the following is for reference only. Please check the thread size of your motor before ordering.Compatible with ATK-Rotax Models: Most ’03 WR450F 4 Stroke Enduro...

Flywheel Puller 91-849154T1 Lifting Ring 91-90455-1 Compatible with Mercury Mariner Optimax

This listing is for a new flywheel puller with crank shaft protector and lifting ring.  Replaces Flywheel Puller part number: 91-849154T1; Replaces Lifting Ring part number: 91-90455-1. Compatible with most 50HP and up Mercury, Mariner, Force and...

Flywheel Puller [30mm x 1mm] Compatible for Yamaha WR450F Enduro

This listing is for a new Flywheel Puller 30mm x 1mm with Right Hand Threads. Note: the following is for reference only. Please check the thread size of your motor before ordering.Compatible with Yamaha model: most Yamaha 2003 - WR450F 4 Stroke...

Flywheel Puller [42mm x 1.5mm] Compatible for SeaDoo

This listing is for a new Flywheel Puller 42mm x 1.5mm Right Hand Threads.Note: the following is for reference only. Please check the thread size of your motor before ordering.Application: SeaDoo OEM puller, used with SeaDoo Plate # 420876081 to pull mag...